Sport Slopers
and
Hand Launch Gliders



Sport Slope Soaring Aircraft

New Phoenix web top on grass-3-3.jpg (110204 bytes)

*NEW*
Item #10PHOEN-M
$169.99
S&H $16.99

This kit is a Fast build kit.  All of the parts are pre-
painted fully hollow molded fiberglass.  No iron
on covering on this one.

 

Phoenix in blue on grass-2.-2jpg.jpg (113117 bytes)
This is another color pattern that is available
on the Phoenix.  You can use the same buy now
button above.  In the comment box specify
which color pattern you would like Yellow
or Blue Starburst.

 



Phoenix

Fast build kit

Pre-painted fiberglass fuselage
with molded in vertical

Separate fiberglass canopy

Pre-painted fully hollow molded
fiberglass full flying stabs

Pre-painted fully hollow molded
fiberglass wings with live hinged
ailerons

CD instructions

 

SPECIFICATIONS

Wing Span - 28"
Wing Area - 162 sq.in.
Wing loading - 9-10 oz./ sq. ft.
Ready weight - 10.5 - 11 oz.
Airfoil-SD 6060 Mod

Functions
Ailerons, elevator

K&A Models is proud to bring you their new PHOENIX fast build kit for the slope enthusiast.  We designed the PHOENIX with the wing mounted midway on the fuselage and a full flying stab.  This makes the PHOENIX less susceptible to wing or stabilizer damage for those landing sites that are not so ideal.  The PHOENIX is very stable in flight and can perform nice clean aerobatic maneuvers with the best of them.  This airframe is also very comfortable flying inverted.  All of the main components are hollow molded fiberglass and are pre painted for you.  Just a few simple steps and your ready to go fly in just a few hours.  The light wing loading allows you to fly on even the smallest of slopes. The PHOENIX can perform in winds as light as 10 mph or as strong as 30 mph.  The separate fiberglass canopy allows easy excess to your radio gear. The PHOENIX makes for an ideal compact sloper.   Requires a two channel radio with 3 micro servos such as HS-56's and a mini receiver.

 

ARF Mini-1-4.jpg (93604 bytes)

*NEW*
Item #10Mini-1M
$169.99
S&H $16.99

This kit is a Fast build kit.  All of the parts are pre-
painted fully hollow molded fiberglass.  No iron
on covering on this one.


Mini-1 Fast build kit

Pre-painted fiberglass fuselage
with separate fiberglass canopy

Pre-painted fully hollow molded
fiberglass tail surfaces with live
hinged elevator

Pre-painted fully hollow molded
fiberglass wings with pre hinged ailerons

CD instructions

 

SPECIFICATIONS

Wing Span - 28.5"
Wing Area - 164 sq.in.
Wing loading - 9-10 oz./ sq. ft.
Ready weight - 10.5 - 11 oz.
Airfoil-Eppler 374 Mod

Functions
Ailerons, elevator

Were bringing back the model that started K&A Models 25 years ago.  We just could not resist bringing the Mini-1 back out in a pre-painted all hollow molded fiberglass fast build kit.  All of the main components are hollow molded and pre painted for you.  Just a few simple steps and your ready to go fly in about 1 hour.  The Mini-1 which many will remember is a very fast an agile plane that is fully aerobatic.  The light wing loading allows you to fly on even the smallest of slopes. The Mini-1 is right at home in winds as light as 10 or as strong as 30.    The separate fiberglass canopy allows easy excess to your radio gear. The Mini-1 makes for an ideal compact sloper.  Small in size but big on performance.   Requires two channel radio with 3 micro servos such as HS-56's and a mini receiver.

 

*NEW*
Epoxy glass fuse #10133
$119.99
S&H $16.99

ACCELORATOR
  • Epoxy fiberglass fuselage with
    separate canopy
  • Precision cut balsa and ply parts
  • Foam core wings
  • Plans with instructions

SPECIFICATIONS

Wing Span - 60"
Wing Area - 370 sq.in.
Wing loading - 7-8 oz./ sq. ft.
Ready weight - 17 - 18 oz.
Airfoils used for wing are RG15,RG14,SD7003

Functions
Ailerons, elevator

K&A Models brings you the new ACCELORATOR slope glider. The ACCELORATOR has a very clean and light weight airframe design allowing you to fly in light wind conditions or to load up for those really fun days. The specially designed triple airfoil wing gives the ACCELORATOR its speed and maximum energy retention throughout its maneuvers. Give the ACCELORATOR a try, it will most likely become your favorite to fly. Requires two channel radio with 3-4 mini servos and mini receiver.

 

MINI-1 XL
  • Precision cut balsa and ply parts
  • Foam core wings
  • Full size plans with instructions

SPECIFICATIONS

Wing Span 31 IN
Wing Area 162 SQ IN
Wing Loading 8 SQ FT
Ready Weight 10-11 OZ
Airfoil RG14 Modified

Functions
Ailerons, elevator


CAT#10130
$79.99
S&H $16.99

The MINI-1 XL delivers clean and precise maneuvers with every command. The sharp lines and ease of handling of this high performance slope glider is matched by no other. Try the new MINI-1 XL and see the excitement in flying high performance slope gliders. Requires a two channel radio with 3 mini servos and mini receiver.
BLUFF RUNNER
  • Balsa & plywood fuselage
  • Precision cut balsa and ply parts
  • Built up D-tube wing
  • Full size plans with instructions

SPECIFICATIONS

Wing Span - 32"
Wing Area - 224 sq.in.
Wing loading - 8-9 oz./ sq. ft.
Ready weight - 11-13 oz.
Airfoil - NACA 2409

Functions
Ailerons, elevator

*NEW*
#10136
$79.99
S&H $16.99

K&A Models brings you the new BLUFF RUNNER slope glider. If your looking for a slope glider that is inexpensive, easy to build and a blast to fly the BLUFF RUNNER is your ticket. This little slope glider performs aerobatic maneuvers with ease and it will make a novice pilot look like an advanced flier. The BLUFF RUNNER can be flown in winds as light as 7 mph which makes it ideal for any bluff size. Quick building and easy to fly makes the BLUFF RUNNER a great choice. Requires a two channel radio with 3 mini servos and mini receiver.

 

Dago-Red Racer Slope Soarer
Epoxy glass, #10106
$149.99
S&H $16.99


DAGO RED Slope Soarer
  • Precision cut balsa and ply parts
  • Foam core wings
  • Fiberglass  fuselage
  • Plans with instructions

SPECIFICATIONS

Wing Span - 30.5"
Wing Area - 188.72 sq.in.
Wing loading - 10 oz./ sq. ft.
Ready weight -12.5 - 13 oz.
Airfoil - Eppler 374 8%

Functions
Ailerons, elevator

The DAGO-RED Racer has a more scale like outline and comes with a fiberglass fuselage. This version is also very maneuverable and is capable of performing all aileron and elevator combined maneuvers. Requires a 2 channel radio with 2 mini servos and mini receiver.

Hand Launch Gliders

 

QUEST HLG
  • Available with epoxy  fuselage
    or built up balsa
  • Feather cut foam core wings
  • Precision cut balsa & ply parts
  • Full size plans with instructions

SPECIFICATIONS

Wing Span - 60"
Wing Area - 370 sq.in.
Wing loading - 5 oz./ sq. ft.
Ready weight - 11 - 12 oz.
Airfoil -
SD 7037

Functions
Rudder, elevator

Quest HLG
Epoxy Glass. #10111
$119.99
S&H $16.99

Built Up #10110
$79.99
S&H $16.99

The QUEST Hand Launch Glider is an awesome combination designed for AMA Hand Launch Contests. The light weight construction and feather cut foam core wings with built up tail surfaces produce a very light weight airframe coupled with the use of a SD 7037 airfoil makes the combination hard to beat. The kit is also available with a fiberglass fuselage.  Requires a 2 channel radio with 2 mini servos and mini receiver.

 

Request HLG
Epoxy glass, #10113
$119.99
S&H $16.99

Built up, #10112
$79.99
S&H $16.99

REQUEST HLG
  • Available with epoxy  fuselage
    or built up balsa
  • Feather cut foam core wings
  • Precision cut balsa & ply parts
  • Full size plans with instructions

SPECIFICATIONS

Wing Span - 60"
Wing Area - 370 sq.in.
Wing loading - 5 oz./ sq. ft.
Ready weight - 11 - 12 oz.
Airfoil - SD 3037

Functions
Ailerons, elevator

The REQUEST is a new design of hand launch glider. Designed as a flat winged aileron V-tail gives the REQUEST more versatility than the standard polyhedral configuration. Designed for use of mini equipment. The kit is also available with a fiberglass fuselage.  Requires a 2 channel radio with 3 mini servos and mini receiver.

 

Copyright ©1998 K&A Models Unlimited
All rights reserved.
Revised: 01/12/10 .